8 best card readers

*Review best according to redakciey. About the selection criteria. This material is subjective in nature, is not an advertisement, and does not serve as a guide to purchase. Before buying, you need to consult with a specialist.

Now almost all portable devices save data to a memory card. Such a drive is used in most smartphones, absolutely all cameras, action cameras can not do without it, even game consoles can install a memory card. Well, how to interact with the information on such a card using a computer? Using a card reader! And if you expect fast data transfer, it is better to purchase one of the copies that were included in our selection.

Recommendations for choosing one

Perhaps the choice of a card reader can be called as simple as possible. This is even easier than deciding on a specific model of drill or puncher. In fact, any card reader has only a few basic characteristics. The most important one is the form factor:

  1. Internal card readerdesigned for installation in the appropriate 2.5-or 3.5-inch computer case compartment. This device connects directly to the motherboard.
  2. External card readerconnects to any computer via a USB cable. Some of these card readers have a micro-USB or USB Type-C connector at the end of their cord — this device should be connected to a smartphone or tablet.
  3. Strictly speaking, that isconnectorthis is the second main characteristic. The fact is that the most modern models have a USB 3.0 plug. It is thanks to it that they provide maximum data transfer speed, squeezing absolutely everything out of the memory card.
  4. Another difference between different card readers isin the number of types of supported cards. The simplest devices are sharpened only for a microSD memory card. More advanced card readers support interaction with SD, Memory Stick, CF, and other card formats.
  5. Perhaps we can stop here. However, it is impossible not to mention the price. But it depends entirely on what characteristics the card reader has. It is logical that the options with USB 3.0 are significantly more expensive than the others.

Finally, we note that you can easily do without a card reader. Now it is not difficult to interact with the information contained on a portable device via a USB cable. But it must be a good wire that supports not only the transmission of electricity. Unfortunately, not all users have it. And this is not to mention the fact that now portable devices can have a variety of connectors: Lightning, USB Type-C, micro-USB, and even more outdated.

Rating of the best card readers

Category place product name price
Best external card readers 1 SANDISK ImageMate All-in-One USB 3.0 2 490 ₽
2 Kingston FCR-HS4 1 530 ₽
3 HAMA H-39878 910 ₽
4 GINZZU GR-336B 775 ₽
5 ORICO CRS31 1 199 ₽
6 Kingston MobileLite G4 970 ₽
Best internal card reader 1 GINZZU GR-166U 920 ₽
Best OTG card reader 1 GINZZU GR-325B 338 ₽

Best external card readers

SANDISK ImageMate All-in-One USB 3.0

8 best card readers

The main advantage of this model is its name. It connects to your computer via a high-speed USB 3.0 interface. And not even via the “Troika”, but via its version 3.2, if your computer has one! This means that data from the memory card will be copied at the maximum speed it supports. However, this is the main advantage, but not the only one!

This model has a unique design. Most of all, the device is similar to the early PlayStation 2, only in a significantly smaller size. Here, too, the vertical position on the table is used. At the same time, the product received a neat stand that makes the accessory slightly higher.

In total, the card reader has four slots. All of them are sharpened for different memory card formats. To be precise, these are SD, miniSD (via adapter), microSD, CompactFlash and MemoryStick. Perhaps the only thing missing is a slot for special cards developed by Huawei. But who will notice his absence? By the way, each of the slots has its own light indicator, symbolizing its work.

At the moment, this is one of the fastest card readers. Now tests show that it is able to copy files from a memory card at speeds up to 160 MB/s. And if in the future memory cards become even faster, then the card reader will catch up! Well, the main disadvantage of the device is its price. Whatever one may say, but not everyone will dare to spend 2500 rubles on its purchase.


  • Comes with a USB 3.0 cable;
  • Supports most memory card formats;
  • Unique and interesting design;
  • Each slot has a light indication.


  • Very high cost;
  • Hard to find on sale.

Kingston FCR-HS4

Another card reader that consistently supports the USB 3.2 interface. However, its cost is noticeably lower — usually in Russian stores they ask for about 1400 rubles for it. This price tag is due to the fact that the creators of the accessory did not bother with its design. This is an ordinary “block” with rounded corners, placed flat on the table. This is the case when it is unlikely that it will be located next to the monitor on a permanent basis — much more often you will put it somewhere in the Desk drawer.

This card reader has four slots. They are designed for CompactFlash, SD, microSD, and MemoryStick memory cards. If you have a miniSD card, you will need an adapter to read it. Well, if you have even more atypical memory cards, then you will have to forget about using the Kingston FCR-HS4.

The case of this model is made of plastic. But you may get the impression that metal was used — here an imitation of polished aluminum is used. The product also boasts an activity display. Otherwise, it is a familiar card reader, which has a very modest size. If you need to work with the memory card at maximum speed, then this is a very good option. And not the most, I must say, expensive!


  • Comes with a USB 3.0 cable;
  • All the most popular card formats are supported;
  • Modest size;
  • There is an indication of activity;
  • Nice design.


  • The price is still a bit high.

HAMA H-39878

8 best card readers

Another rectangular card reader with a removable USB cable. The difference between this model is that its corners are rounded noticeably less. The product also has a less prominent design. But the boring appearance had a positive effect on the price tag — in many cases, HAMA H-39878 can be bought for just 900 rubles!

This model also supports the USB 3.2 interface. this means that you will have some groundwork for the future. No matter how fast your memory cards get, you’ll get the most out of them!

Unlike the instances discussed above, the HAMA H-39878 has five slots. This means that the product supports a larger number of memory card formats. There is no doubt that most often you will insert SD and microSD cards here. Professional photographers can use the ability to install a CompactFlash card — the largest slot is designed for it. If you have some old Sony equipment at your disposal, then a MemoryStick slot won’t hurt. You can also insert removable xD-Picture and MMC drives into this card reader. The latter were once used in push-button phones and similar smartphones, but now they are almost forgotten.

In short, HAMA H-39878 is designed for those who regularly deal not only with modern technology, but also with all sorts of retro devices. It is not surprising that the card reader is in high demand, which is why it is less and less common on store shelves.


  • Even older memory card formats are supported;
  • Comes with a high-speed USB cable;
  • Modest size;
  • Not a very high cost.


  • It is found on sale less and less often;
  • The design won’t suit everyone.


8 best card readers

Do you often copy data from one memory card to another? In this case, you may need a GINZZU GR-336B card reader. It features an incredibly large number of slots. Seven slots allow you to place even several cards of the same type inside! In particular, there are two slots for SD-cards and the same number for microSD.

The exterior of this accessory is not anything special. Its body is made of non-marking plastic. It is felt that the manufacturer decided to save money on the design. However, this is typical of THIS company. But the product supports the USB 3 standard.2. the device comes with a removable cable with the famous blue “tab” sharpened for USB 3.0. it’s Nice that the card reader also has an activity indicator. Surprisingly, some manufacturers of such devices usually forget about this trifle.

Above, we talked about the four slots that will be used most often. And which memory card support of the rest of the nest? Well, there won’t be any surprises here. These are CompactFlash, MemoryStick, and xD-Picture. In short, photographers and videographers will be satisfied. It’s nice that the data will be read at the speed that the existing card can give out. And this is despite the fact that this model was announced in 2012! This clearly shows how much the development of removable drives and card readers designed for them has slowed down.


  • It is equipped with an 80-cm cable for USB 3.0;
  • Very large number of slots;
  • The price can not be called extremely high;
  • There is an activity indicator;
  • Miniature sizes.


  • The simplest design.


The closer the end of the rating is, the more often it mentions devices that are boring in appearance. This rule is true for most reviews, including what you are reading right now. ORICO CRS31 has a square shape, the case of the accessory is made of ordinary black plastic. Memory card slots are located here on different sides of the device. And there are only four of them here. They should be found on three sides, while the fourth is allocated for a fixed cable intended for connecting to a computer. Also on the case there was a place for the activity indicator.

The high cost of this model is due not only to its durability, but also to support for the USB 3.2 standard. this Means that you can get the most out of any memory card, no matter which one is at your disposal. A total of four formats are supported here. Most owners of the ORICO CRS31 use SD and microSD slots located one above the other. Photographers should love the CompactFlash slot — as you know, such cards are usually used in professional SLR cameras. Well, the slot for MemoryStick will be useful for owners of The PlayStation Portable game console and some other devices from Sony.

This is one of the most compact card readers in our selection. It differs from its analogues in that you will not be able to lose the USB cable intended for it, because it simply cannot be disconnected. Otherwise, the product is not surprising. The only surprise is the price, which turned out to be too high. It seems that the manufacturer himself understood this-apparently, the production of this model has been discontinued, which is why it is becoming increasingly difficult to find it on sale.


  • It uses USB 3.0 and a faster interface;
  • The wire won’t get lost for sure;
  • All major memory card formats are supported;
  • There is an indication of activity.


  • It is rarely found on sale;
  • The price seems too high;
  • I would like more slots;
  • In terms of design, it is not of any interest.

Kingston MobileLite G4

8 best card readers

The tiniest card reader in our selection. It does not require any wire-the device has its own USB plug. The blue ” tab ” indicates that it belongs to the USB 3.0 standard. this Means that you can squeeze data from the memory card at the maximum available speed.

It is clear that on such a small card reader there could not be a place for any large number of slots. There are only two sockets on the back of the device. The first is for the SD card, while the second is for microSD. As expected, you can use both cards at the same time, copying data from one to the other.

The length of this crumb is only 52 mm. And this is not the smallest card reader! There are even tinier instances. But we do not recommend considering buying them, unless you take such a copy to be paired with, for example, a car radio. First, they are not particularly durable. Secondly, they only support a microSD memory card. And what will you do if you need to copy the photos contained on the card inserted in the SLR camera?

Kingston MobileLite G4 will serve you almost forever. It’s nice that nothing will happen to this model even if you sit on it. The fact is that a strong aluminum case is used here. This is partly due to the price tag, which is approximately 600 rubles.


  • The built-in connector is used;
  • The USB 3.0 standard is supported;
  • Tiny dimensions;
  • The case is very strong.


  • There is no light indication;
  • Missing slots for not – so-popular memory cards;
  • The price is not particularly low;
  • It may block access to an adjacent connector.

Best internal card reader


8 best card readers

Our rating couldn’t do without at least one internal card reader. This is the name of a device that is installed inside a computer case. Previously, such accessories replaced the disk drive. As for the GINZZU GR-166U, it fits in a 3.5-inch Bay. Most computer owners use this Bay for a DVD drive. Most importantly, you don’t have to get rid of the optical drive — many computer cases have two, three, or even more such bays.

This card reader is connected to a high-speed USB bus located on the motherboard. At the same time, it can become its continuation! The fact is that the device has a place for a full-fledged USB 3.0 connector. do I Need to say that such a socket is never superfluous?

As for the memory card slots, there is absolutely everything you need. Most often, in modern realities, a microSD slot will be used. The slot for a full-size SD card will be used a little less frequently. The remaining slots are designed for CompactFlash, MemoryStick, xD-Picture, and even MMC cards. In short, with such a card reader, you can successfully interact with any portable devices — even with some already forgotten Siemens S75 mobile phone. And you shouldn’t even talk about more modern devices.

It remains to add that there is an indication of activity here, as on most CD-drives. You can buy GINZZU GR-166U in those online stores that sell computer components. Unfortunately, now this model is found on virtual counters less and less often. First, its production has already been discontinued. Secondly, fewer and fewer people now use desktop computers — many are opting for a laptop or even a tablet.


  • It will complement your home PC well;
  • Supports all popular memory card formats;
  • Connects to a high-speed USB bus;
  • Card slots are supplemented with a USB 3.0 connector;
  • The price is not particularly high;
  • There is an activity indicator.


  • It is found on sale quite rarely;
  • If there is no PC, then the purchase will be meaningless.

Best OTG card reader


8 best card readers

Now many people do without a desktop PC or even a laptop. But what should you do if, for example, you need to copy materials from the SD card that was in the camera? You won’t be able to insert it into your smartphone or tablet. For this purpose, you will either have to use a regular card reader, connecting it via an OTG adapter, which is always lost, or get a full-fledged OTG card reader. We recommend the second option. You should not be afraid of financial costs, since usually only 500 rubles are asked for such accessories. In particular, this is the price tag that the GINZZU GR-325B has.

This device is a kind of transformer. Its creators have tried to ensure that their creation can be connected to a variety of devices. At one end is a USB Type-C connector. It is used to connect the card reader to a modern smartphone equipped with the appropriate port. On the other end, there is a micro-USB plug, which is necessary for owners of devices that were not released yesterday. With a simple action, this connector can be turned into a full-size USB plug. This allows you to insert the card reader into the traditional USB port of a desktop computer or laptop.

Please note that this model only supports the USB 2.0 standard. this means that copying and writing files will take a long time — you won’t be able to get the most out of your cards even if the card reader is connected to your computer. This is the reason for such a low price.

As for the card slots, there are places for SD, microSD and, of course, MMC. It seems that such a set will be enough for the absolute majority of owners of modern smartphones.


  • There are three different plugs present at once;
  • Very low cost;
  • Completely missing any wires;
  • There are slots for both SD and microSD cards.;
  • Convenient design.


  • No slots for MemoryStick and CompactFlash;
  • Supports only the low-speed USB 2.0 standard;
  • The length of service life raises questions.


Now you know which card readers are the best. You also understand exactly how to choose such a device. In short, you should focus on the form factor of the memory cards you use, as well as on whether or not your computer has a high-speed connector. You may also want to consider buying an internal card reader, which will be a great addition to the CD-drive or even its replacement.

Attention! This rating is subjective in nature, is not an advertisement, and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

You like? Share!

You may be interested: