Modern jackhammers are highly specialized equipment for a wide range of tasks. The tool is widely used for construction and repair work-installation and dismantling, laying electrical networks and water pipes, punching or expanding niches, door and window openings in concrete and brick. The best jackhammers easily cope with the tasks set, because they have optimal technical characteristics and are easy to use. When choosing a jackhammer, it is necessary to take into account not only its parameters, but also the specifics of the upcoming work. It is the upcoming work that directly determines the required power, performance and frequency of impact. In our review, we will look at some of the best models of network and pneumatic bumpers, tested by craftsmen in different production conditions.
The key factor in choosing a bump stop is the impact force, measured in j (Joule). A high indicator allows you to use a jackhammer for heavy and complex tasks, for example, to increase openings, dismantle foundations. The lack of force can only be compensated by the frequency of impact, the higher it is, the more productive the tool is.
Best electric jackhammers
Electric jackhammers operate from a standard 220 V network, so they can be used both in everyday life and in production. They are relatively quiet and quite easy to use, which has earned them wide popularity among users of various fields. It is these modifications that are most often purchased for home repairs or when you need to buy a bump for one-time construction and installation work.
Network models are represented by a rich selection, they are produced by almost all brands, and in different layouts-from very economical and light hammers to top-end heavy units.
1. Makita HM1203C
According to the technical characteristics and impact energy, the MAKITA bump belongs to the average level of percussion instruments. At the same time, the quality of manufacture and endurance of all mechanical components remain at the highest level, which makes this bump the best choice for daily operation under high loads. The MAKITA hammer is equipped with all the necessary systems for comfortable operation. First of all, these are constant electronics that keep the speed at the same level, regardless of the load, and a soft start function that prevents jerks when switching on.
As it follows from the reviews, the optimal scope of application of this model is the dismantling of brick structures, opening the asphalt surface and working with medium-hard concrete. With all these materials, the hammer copes easily, the only thing for which it is not suitable is high-strength concrete mixes. In this case, its 1.5 kW of power will not be enough.
- high performance;
- possibility of continuous operation;
- indicators of wear of the brushes and the integrity of the cable;
- long power cord – 5 m;
- sophisticated vibration damping system;
- high-strength impact mechanism.
- it can’t handle high-strength concrete.
2. Bosch GSH 501 Professional
The lightweight Bosch electric hammer with the SDS-max attachment type is a typical representative of the brand’s professional line, with all its characteristic advantages. At the heart of the tool is a powerful engine with an extended resource, which allows you to perform heavy, labor-intensive work on an industrial scale on a daily basis.
The bump has a good impact force of 7.5 j, transmitted to the equipment through a specially designed to increase productivity, elongated barrel. To make the electric jackhammer last much longer, its body is made of high-impact plastic that can withstand even falling from a height. And the tool itself is designed in such a way that all switches are protected from damage when they come into contact with the surface. Reviews of the owners indicate that there are no objective shortcomings in this model.
- high quality components and parts;
- robust housing;
- power cord with anti-break protection;
- reliable and practical;
- light weight.
- the high cost of maintenance.
3. STANLEY STHM10K
A jackhammer with good impact power has proven to be a high-performance tool that can handle almost any material. You can use it to expand doorways, open up road surfaces, and dismantle brick and concrete fences or walls. The quality of production of the bump and technical characteristics allow it to be used not only in everyday life, but also in professional conditions. The classic design of the hammer provides a reliable grip and comfort during operation, both in vertical and horizontal positions. However, there are negative responses with complaints about the high weight of the hammer drill, which makes it difficult to work on weight.
- high impact energy;
- soft start;
- the presence of the wear indicator brushes;
- rubberized handle;
- high power output;
- ergonomic design.
- a lot of weight;
- the short cable.
4. Hitachi H41MB
The h41mb jackhammer model is equipped with an electric motor with a power of only 930 watts, which has a positive effect on the weight of the tool. At the same time, in terms of impact force – 10 j, it significantly exceeds not only analogues, but also more powerful tools. Together with the highest quality of workmanship and affordable price, it is safe to say that this bump is the best in its class. The manufacturer also took into account the specifics of this model – since light punchers are often used for working at height, its body is made of shockproof plastic. And rubberized handles at the contact points will not allow the tool to slip out of your hands. Users also note the good configuration of the popular bump, which includes a strong, roomy case and the necessary equipment for work. Some of the negative aspects are the lack of indicators of brush wear and the integrity of the power cable.
- light weight-5.1 kg;
- high performance;
- low power consumption;
- quality of components.
- there are no indicators of power cord integrity or brush wear.
5. Sturm! RH2521P
The electric jackhammer of the German brand Sturm stands out for its impressive impact power and high performance. More than two kW of electric motor power is enough to produce 60 joules, which is the best indicator in the class of heavy bumpers. Such technical data allow us to use the device for the most complex work on the destruction or dismantling of any objects or structures, even from strong, monolithic concrete.
To increase the service life, the electric hammer is equipped with an improved ventilation system and a more reliable gearbox compared to its predecessors. And to facilitate the operator’s work, the manufacturer has provided a dual vibration damping system. Most of the reviews of the owners of this model are positive, mostly the tool is praised for the reliability of internal components and the highest power, but it was not without drawbacks. First of all, it is a fragile main handle, which often breaks due to shock loads, a short power cord and a large weight.
- impact force 60 j;
- low vibrations;
- good protection from dust;
- hardy engine;
- quick access to carbon brushes;
- affordable price.
- heavy weight-17 kg;
- short cable;
- not a high-quality top handle.
6. SOYUZ PES-2520RB
An inexpensive but reliable jackhammer is very popular. Due to the lack of additional electronics and functions, the manufacturer managed to reduce the cost of the tool, while maintaining quality. Betonolom easily copes with the dismantling of brick walls, concrete structures, suitable for the destruction of large stones in the construction of foundations. The reinforced impact mechanism is designed for use in the most severe conditions, and the hardy, non-overheating motor allows you to operate the tool full-time. High performance of the PES-2520rb model is achieved due to a large number of beats per minute – 1300, and forces of 49 j, such parameters bring the bump to the leaders in terms of price-performance ratio. The downside is high vibration due to the lack of a damping system, which leads to heavy loads on the operator during operation.
- high impact energy 49 joules;
- low price;
- easy maintenance;
- variety of snap-ins;
- hardy electric motor.
- high vibration;
- fast wear of carbon brushes.
Best pneumatic jackhammers
In terms of reliability and convenience, pneumatic bumpers are not inferior to network models, and even surpass them in terms of performance and power. Due to the fact that they require an air compressor, such tools are not often taken for domestic use, they are more popular on construction sites, in industrial settings. In addition to the impressive operational life, units of this type are safer to use in very dusty rooms, as well as in places with a high fire hazard.
Our rating presents the top five pneumatic hammers that are suitable for both garden and garage construction and for the harsh conditions of multi-storey construction. All models belong only to reliable brands that will provide owners with good service centers and spare parts for regular maintenance.
1. Metabo DMH 30 SET
For professional tasks of interior decoration and repair of premises, this model is suitable for all parameters. The ergonomic design and low weight contribute to long, voluminous work. The main purpose of the tool is to remove old tiles, plaster, masonry and other types of work where high productivity is required. The pneumatic hammer is equipped with everything you need – a case for storage and carrying, a set of accessories from four chisels of different shapes, additional fittings, this allows you to significantly save on purchases. In addition, as users note, everything that is included in the kit, as well as the tool itself, is distinguished by high quality workmanship and a large resource. Reviews about this pneumatic hammer are only positive, this allows us to say with confidence that it has no objective shortcomings.
- weight 2 kg;
- low air consumption;
- large equipment set;
- the quality of workmanship.
2. Wester VM-10
An indispensable assistant for car service stations and finishers, the pneumatically driven beam bump can easily solve tasks that are beyond the power of other types of tools. A special hammer attachment consisting of a bundle of hardened steel needles quickly repels old paintwork, rust, plaster and other materials or dirt from any surface. At the same time, the design of the tool allows you to work not only with flat planes, but also with parts with complex geometries. The speed of processing and the possibility of using it in a limited space make it the undisputed leader among its analogues in terms of technical characteristics. In terms of reliability, the hammer is also not inferior to competitors – all parts and internal components are made of good metal, which has a positive effect on the service life of the device.
- large selection of tools for different jobs;
- high performance;
- low compressed air consumption;
- ability to use it in a limited space.
- the high cost;
- unable to cope with the stubborn rust.
3. CALIBER PNZ-19/800 Pro
The lightweight pneumatic hammer from the lowest price category is easy to operate and has almost no recoil. Thanks to this, you can use it in cases where you have to do the work with one hand. A small impact force is compensated by a high frequency-4500 beats / min, as a result, the bump is also excellent for delicate work. The body and handle are made of metal and perfectly dissipate heat, increasing the service life. The complete set has everything you need to start working immediately after purchase. According to the owners, the price-quality ratio of the hammer is at a high level, which brought it to the TOP of the best. But its modest characteristics significantly narrow the scope of application.
- low price;
- suitable for delicate work;
- easy-grip handle;
- low vibration level.
- lets in air;
- low power.
4. Fubag HRS 4500 (100120)
A well-known manufacturer of pneumatic tools, the Fubag brand is famous for the quality of the manufactured equipment. The HRS 4500 model, designed for professional use, is no exception. A good pneumatic jackhammer can cut through studs and nuts, remove tiles, old plaster, and even make gouges in concrete walls. Among the features, it is worth noting the very low weight-without tooling, it does not exceed one kg, the convenient shape of the handle and the ability to adjust the air supply. There are no significant drawbacks to the tool, but, as users note, the hammer needs a high-performance compressor and lacks an anti-slip handle cover.
- large capacity;
- high resource;
- the lightest in its class.
- significant consumption of compressed air;
- there is no rubber coating on the handle.
5. THE CALIBER OF THE WEAPONS OF MASS DESTRUCTION-815
The KALIBR industrial chipper belongs to the category of heavy pneumatic equipment capable of carrying significant loads on construction sites. The powerful hammer gives out 43 joules and can break any concrete, open the road surface, destroy stones and brick partitions. The air consumption is only 1560 l/min. The modern design distinguishes it favorably by the absence of vibrations, a small weight of 11 kg for its class, and the reliability of all mechanisms. There is also a good balance of the tool, which reduces the load on the operator. Given the performance characteristics of the OMP-815 bump and positive reviews, it can be called the best pneumatic hammer for professional work.
- high impact power;
- absence of vibration;
- good ergonomics and balance.
- sensitivity to low temperatures.
Which jackhammer is better to buy
Often, when buying a new unit, there are doubts about which one is better to buy – a pneumatic or electric jackhammer. There is no single recommendation, it all depends on the scope of work and the possibility of using compressor equipment.
The right choice of jackhammer for work or one-time repairs is the choice of the appropriate combination of technical parameters. Light models are suitable for small jobs, powerful and productive-for capital construction or repair. It is important to remember that the equipment of this class is not clearly divided into household and professional class. Bumpers are selected exclusively according to the parameters that depend on the upcoming work.